As an Amazon Associate I earn from qualifying purchases.1. DR TOOLS
DR TOOLS for Ford Ka Fiesta Fusion mk4 Rear Axle Suspension Bush Fitting Install Pressing Mounting Tool
DR TOOLS - Puma 1997-2001, courier mk 11 1991-2002. Fiesta mk4 1995-2002,. Ka 1996-2008. Street ka 2003-2005.
2. Laser
Laser 4779 Rear Trailing Arm Suspension Bush Tool, for BMW 3 Series
Laser - Made in Sheffield. Threaded bar made from high tensile steel for extra strength. This rear trailing arm suspension bush tool is suitable for BMW 3 Series E36, E46, E46 Compact.
Spare parts available: thrust nut Part No 1803, Threaded Bar Part no 1792. Use with ratchet ring spanner - Flexi Head 24mm Part No 5753.
| Brand | Laser |
| Manufacturer | The Tool Connection Ltd. |
| Height | 25 cm (9.84 Inches) |
| Length | 10.5 cm (4.13 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 10.5 cm (4.13 Inches) |
| Part Number | 4779 |
| Model | 4779 |
3. Laser
For Vauxhall, Laser 4793 Rear Suspension Bush Tool
Laser - Made in Sheffield. Spare parts available: thrust nut Part No 1816, Threaded Bar Part No 1815. Applications: vauxhall vectra 16, 20 from 1995, 18, 25 from 1996.
Use with ratchet ring Spanner - Flexi Head 19mm. For use on rear upper and lower bushes Suitable for use on vehicle, without removing the trailing arm assembly from the vehicle.
| Brand | Laser |
| Manufacturer | The Tool Connection Ltd. |
| Height | 15.5 cm (6.1 Inches) |
| Length | 5.7 cm (2.24 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 5.7 cm (2.24 Inches) |
| Part Number | 4793 |
| Model | 4793 |
4. Laser
Volvo, Laser 6163 Rear Suspension Bush Tool, for Ford
Laser - Applications: ford mondeo mk iv 2007 - 2015, v60, s80 ii, galaxy 2006 - 2015, s-max 2006 - 2013; volvo s60 ii, XC70 II, xc60, V70 III 2006 - 2013. Specially designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates.
Equivalent to oeM 205-1017. Made in Sheffield. Spare parts available: top plate part no 1681, force Screw Assembly Part No 1682 Use with Ratchet Ring Spanner - Flexi Head 19mm.
| Brand | Laser |
| Manufacturer | AutoMotion Factors Limited |
| Height | 32.5 cm (12.8 Inches) |
| Length | 21.5 cm (8.46 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 21.5 cm (8.46 Inches) |
| Part Number | LAS6163 |
| Model | 6163 |
5. Youyijia
Youyijia 23Pcs Press Pull Sleeve Kit Car Suspension Seal Bush Bearing Auto Bushing Press Puller Removal and Installation Tool Extractor Bush and Bearing Removal Set Universal Front Wheel Tool Kit
Youyijia - Package includes: 23 piece set of elevation bearing remover. Strong and durable material: Made of high quality material, very durable and not easily damaged. Wide application: includes 9 different sizes of drift, 55, suitable for a wide range of options: 50, 67, 82, 64, 72, 78, 60, 75, 70, 84, 74, 88mm.
Easy storage and pick-up: comes with a case for easy storage and next use, and is also easy to carry. Suitable for many models: Ideal for most front-wheel drive vehicles, as well as some light trucks and vans.
6. Laser
For Land Rover, Laser 6193 Rear Suspension Upper Hub Bush Tool
Laser - Equivalent to oem 204-530 designed for OEM bush RHF500100 Applications : discovery 3 & 4 2004 on, Range Rover Sport 2005 on. Consumable spares available - Part Nos 1319, 1803. Can be used in situ which saves time and reduces the dismantling required.
Rear suspension, upper Hub Bush – removal & installer. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing Laser Tools Recommends Molybdenum Disulphide Grease black drive shaft grease. Made in Sheffield.
| Brand | Laser |
| Manufacturer | Laser |
| Height | 25 cm (9.84 Inches) |
| Length | 7.1 cm (2.8 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 7.1 cm (2.8 Inches) |
| Part Number | LAS6193 |
| Model | 6193 |
7. Draper
Draper 64625 Rear Axle Suspension Bush Removal Tool Kit-
Draper - Expert Quality. International products have separate terms, are sold from abroad and may differ from local products, including fit, and language of product, age ratings, labeling or instructions. Can be used on the vehicle when in situ, removing the need to detach the sub-frame. 0 .
| Brand | Draper |
| Manufacturer | Draper Tools |
| Height | 20.4 cm (8.03 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 2.42 |
| Width | 9.2 cm (3.62 Inches) |
| Part Number | 64625 |
| Model | 64625 |
8. Laser
Laser 5978 Rear Suspension Upper Hub Bush Tool, for Range Rover
Laser - Equivalent to oEM 204-515. Applications : range rover L322 2003-2012. Rear suspension, upper Hub Bush – removal & installer. Made in Sheffield. For use in situ: consumable thrust nut - part no 2138, consumable threaded bar M12 - Part No 1319.
Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing Laser Tools Reco mmends Molybdenum Disulphide Grease black drive shaft grease.
| Brand | Laser |
| Manufacturer | Laser |
| Height | 25 cm (9.84 Inches) |
| Length | 7.2 cm (2.83 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 7.2 cm (2.83 Inches) |
| Part Number | LAS5978 |
| Model | 5978 |
9. AB Tools
AB Tools Front Suspension Bush Remover Extractor Puller Installer For VAG VW Skoda Seat
AB Tools - Suitable for Polo, Fabia, Cordoba. Can be used in situ without removing the aluminium housing. High quality set for removal and installation of bushes etc. For use with a 24mm spanner only. For the removal and installation of the rear mounting bush.
| Brand | AB Tools |
| Manufacturer | AB Tools |
| Height | 10 cm (3.94 Inches) |
| Length | 26 cm (10.24 Inches) |
| Weight | 3.53 kg (7.79 Pounds) |
| Width | 16 cm (6.3 Inches) |
| Part Number | AT294 |
Laser - Made in Sheffield. Threaded bar made from high tensile steel for extra strength. This rear trailing arm suspension bush tool is suitable for BMW 3 Series E36, E46, E46 Compact. Spare parts available: thrust nut Part No 1803, Threaded Bar Part no 1792. Use with ratchet ring spanner - Flexi Head 24mm Part No 5753.
Laser - Made in Sheffield. Spare parts available: thrust nut Part No 1816, Threaded Bar Part No 1815. Applications: vauxhall vectra 16, 20 from 1995, 18, 25 from 1996. Use with ratchet ring Spanner - Flexi Head 19mm. For use on rear upper and lower bushes Suitable for use on vehicle, without removing the trailing arm assembly from the vehicle.
Laser - Applications: ford mondeo mk iv 2007 - 2015, v60, s80 ii, galaxy 2006 - 2015, s-max 2006 - 2013; volvo s60 ii, XC70 II, xc60, V70 III 2006 - 2013. Specially designed to install or remove the bush on the vehicle without the need to disconnect the brake lines or removal of the bush positioning bolts or mounting plates. Equivalent to oeM 205-1017. Made in Sheffield. Spare parts available: top plate part no 1681, force Screw Assembly Part No 1682 Use with Ratchet Ring Spanner - Flexi Head 19mm.
Youyijia - Package includes: 23 piece set of elevation bearing remover. Strong and durable material: Made of high quality material, very durable and not easily damaged. Wide application: includes 9 different sizes of drift, 55, suitable for a wide range of options: 50, 67, 82, 64, 72, 78, 60, 75, 70, 84, 74, 88mm. Easy storage and pick-up: comes with a case for easy storage and next use, and is also easy to carry. Suitable for many models: Ideal for most front-wheel drive vehicles, as well as some light trucks and vans.
Laser - Equivalent to oem 204-530 designed for OEM bush RHF500100 Applications : discovery 3 & 4 2004 on, Range Rover Sport 2005 on. Consumable spares available - Part Nos 1319, 1803. Can be used in situ which saves time and reduces the dismantling required. Rear suspension, upper Hub Bush – removal & installer. Adequate and appropriate lubricants to be used on threaded force screws and thrust bearing Laser Tools Recommends Molybdenum Disulphide Grease black drive shaft grease. Made in Sheffield.
AB Tools - Suitable for Polo, Fabia, Cordoba. Can be used in situ without removing the aluminium housing. High quality set for removal and installation of bushes etc. For use with a 24mm spanner only. For the removal and installation of the rear mounting bush.
